Instructions Dipping Powder

Preparation

File your nails into the desired shape and gently push back your cuticles.
For optimal adhesion, lightly roughen/match natural nails with a buffer block or the fine side
of a file before applying.
Be sure to also remove invisible cuticles and skin debris to prevent them from coming off.
Do not apply oil or cream before use.

Step 1. Base Coat and Colour Dipping Powder.

Apply a thin layer of Base Coat. The first coat should be quick and does not need to be too
precise. Be careful not to paint the cuticles, as this can cause air bubbles under the nails and
affect adhesion.
Then directly, at a 45-degree angle, gently dip your finger into the colour dipping powder and
tap off the excess dipping Powder. Next, remove the excess dipping Powder by brushing it
gently over the surface. Repeat the process on the rest of your nails. Paint one nail at a time
and then dip directly into the dipping Powder before starting the next nail.

Step 2. Base Coat and Colour Dipping Powder.

Repeat Step 1 for optimal coverage, adhesion and beautiful, stunning colour intensity.

Step 3. Activator Coat

Apply the Activator Coat over the entire nail surface, edges and also on the tip. The Activator
Coat is the most important step in the application process, as it seals and binds the layers to
the nail and prevents air bubbles from forming and ensures long-lasting adhesion. Allow the
Activator Coat to dry for two minutes.

Step 4. Filing and polishing.

Now you can use the fine side of the file or a buffer to file away all the bumps and blemishes
and bring the nails to the desired shape and thickness. It is important to file carefully so that
you do not damage the surface and nails.

Step 5. Activator layer.

Repeat step 3. Again, apply the Activator Coat to the entire nail and its perimeter to optimally
seal the layers. Then allow the Activator Coat to dry for two minutes. To ensure that the
Activator Coat is dry, clean the surface of the nail with a paper towel after 2 minutes. This is
to prevent the Top Coat from curing due to contamination.

Allow two minutes waiting time between Top Coat and Activator Coat.

Step 6. Top Coat.

Apply a thin layer of Top Coat evenly with 2-3 quick strokes and let it dry for two minutes.

Step 7. Top Coat.

Repeat step 6. Apply a second, thin coat of Top Coat to the nails. Then let this dry for two
minutes.